Londri Fireclay Laundry Sink - 640 x 610mm - White

(0) No Reviews yet
Model Number: 108640
$595.00
Australia Wide
✔ Glazed on All Four Sides
✔ Available with Single Taphole
✔ Made of Fine Fireclay

Optional Ribbed Wooden Scrub Board Available
Internal Dimensions534 x 530 x 302mm
Colour/FinishWhite
Installation TipAny sealant used where your fireclay sink meets a bench-top needs to be flexible (like silicone), rather than rigid (like stone adhesive) to allow for any differential in expansion rates between the bench top and the sink.

When installing the waste fitting/s it is important to use some silicone sealant between the stainless steel waste flange (the part that you will see in the sink around the plug) and the glazed sink itself. This is to stop water from draining under the flange when the sink is filled. Please note that if surfaces are cleaned with a cloth dampened with Mineral Turps the silicone adheres very well. Also use the same cloth to clean up any excess silicone that squeezes out when the waste fitting is tightened. Ensure that the silicone is cleaned up BEFORE it dries.
VarianceAll dimensions are in mm. Dimensions may vary by up to plus or minus 2%; we recommend that customers do not cut out work surfaces or units until they have taken delivery of their sink.

Because all our fireclay sinks are handmade using traditional methods, they are 100% unique. Slight variations in the finish from one sink to the next add character and are in keeping with the way these sinks have been made for the past 100 years.
Litreage65L
MaterialFireclay
WarrantyLifetime Guarantee
BrandTurner Hastings
Sink InstallationInset/Drop In
Waste(s) Size40x50mm
Waste(s) Fittings IncludedYes (One)
Waste(s) TypePlug & Waste
External Dimensions640 x 610 x 320mm
BowlsSingle Bowl
OverflowYes

Ratings & Reviews

No reviews available

Be the first to Write a Review