Shaws Egerton Patterned Farmhouse Sink - One And A Half Bowl
|Stock Availability||This sink is also available in a biscuit (cream) colour, however the cream variety are not stocked in Australia and will have to be ordered in. Please contact us to confirm lead times.|
|Internal Dimensions||Bowl 1: 593 x 400mm (219mm Depth) Bowl 2: 305 x 400mm (219mm Depth)|
|Country of Manufacture||U.K.|
|Installation Tip||Any sealant used where your fireclay sink meets a bench-top needs to be flexible (like silicone), rather than rigid (like stone adhesive) to allow for any differential in expansion rates between the bench top and the sink. |
When installing the waste fitting/s it is important to use some silicone sealant between the stainless steel waste flange (the part that you will see in the sink around the plug) and the glazed sink itself. This is to stop water from draining under the flange when the sink is filled. Please note that if surfaces are cleaned with a cloth dampened with Mineral Turps the silicone adheres very well. Also use the same cloth to clean up any excess silicone that squeezes out when the waste fitting is tightened. Ensure that the silicone is cleaned up BEFORE it dries.
|Variance||All dimensions are in mm. Dimensions may vary by up to plus or minus 2%; we recommend that customers do not cut out work surfaces or units until they have taken delivery of their sink. |
Because all our fireclay sinks are handmade using traditional methods, they are 100% unique. Slight variations in the finish from one sink to the next add character and are in keeping with the way these sinks have been made for the past 100 years.
|Sink Installation||Under Mount|
|Waste(s) Fittings Included||Yes (Two)|
|Waste(s) Type||Chrome Basket Waste|
|External Dimensions||997 x 470 x 255mm|