Shaws Lab Sink 4 - Bar Sink
|Stock Availability||Shaws sinks are a very popular product and are always in very high demand. As they are all hand-finished in the UK this can lead to significant lead-times. Please order in advance, allowing ample time for delivery of your Shaws Sink. Please feel free to call us to confirm lead times.|
|Internal Dimensions||375 x 280mm|
|Country of Manufacture||U.K.|
|Installation Tip||Any sealant used where your fireclay sink meets a bench-top needs to be flexible (like silicone), rather than rigid (like stone adhesive) to allow for any differential in expansion rates between the bench top and the sink. |
When installing the waste fitting/s it is important to use some silicone sealant between the stainless steel waste flange (the part that you will see in the sink around the plug) and the glazed sink itself. This is to stop water from draining under the flange when the sink is filled. Please note that if surfaces are cleaned with a cloth dampened with Mineral Turps the silicone adheres very well. Also use the same cloth to clean up any excess silicone that squeezes out when the waste fitting is tightened. Ensure that the silicone is cleaned up BEFORE it dries.
|Variance||All dimensions are in mm. Dimensions may vary by up to plus or minus 2%; we recommend that customers do not cut out work surfaces or units until they have taken delivery of their sink. |
Because all our fireclay sinks are handmade using traditional methods, they are 100% unique. Slight variations in the finish from one sink to the next add character and are in keeping with the way these sinks have been made for the past 100 years.
|Sink Installation||Inset/Drop In|
|Waste(s) Fittings Included||Yes (One)|
|Waste(s) Type||Chrome Plug & Waste|
|External Dimensions||460 x 365 x 200mm|