• Home
  • 1901 Inset Sink - 820 x 520 x 285mm - Gloss White

1901 Inset Sink - 820 x 520 x 285mm - Gloss White

(0) No Reviews yet
Model Number: P-AB5800W
Australia Wide
Helpful links:
Installation Guide
Caring for your 1901 Sink

✔ Solid Fireclay
✔ Heat and Scratch-Resistant
✔ Australian Brand, 1901 Sinks and Taps
✔ Plug & Waste Fitting Included
Internal Dimensions730 x 430 x 235mm
Installation TipAny sealant used where your fireclay sink meets a bench-top needs to be flexible (like silicone), rather than rigid (like stone adhesive) to allow for any differential in expansion rates between the bench top and the sink. When installing the waste fitting/s it is important to use some silicone sealant between the stainless steel waste flange (the part that you will see in the sink around the plug) and the glazed sink itself. This is to stop water from draining under the flange when the sink is filled. Please note that if surfaces are cleaned with a cloth dampened with Mineral Turps the silicone adheres very well. Also use the same cloth to clean up any excess silicone that squeezes out when the waste fitting is tightened. Ensure that the silicone is cleaned up BEFORE it dries.
VarianceAll dimensions are in mm. Dimensions may vary by up to plus or minus 2%; we recommend that customers do not cut out work surfaces or units until they have taken delivery of their sink. Because all our fireclay sinks are handmade using traditional methods, they are 100% unique. Slight variations in the finish from one sink to the next add character and are in keeping with the way these sinks have been made for the past 100 years.
WarrantyLifetime Guarantee (Replacement Product Only)
Brand1901 Sinks & Taps
Sink InstallationInset/Drop In
Waste(s) Size90mm
Waste(s) Fittings IncludedYes (One)
Waste(s) TypeBasket Waste (Select Colour/Finish)
External Dimensions820 x 520 x 285mm
BowlsSingle Bowl

Ratings & Reviews

No reviews available

Be the first to Write a Review