Bathroom Tapware - Roulette Bath and Shower Set with Floor Legs - CB
|Country of Manufacture||Australia|
|Maximum Working Temperature (Degrees)||65|
|Suitable for Hot Water Units||Yes|
|Finish Details||For detailed information on each finish, please see our Finish Guide|
Chrome and Brass Gold are standard finishes. All other finishes are special finishes and are non-returnable.
|Registered Model Number||RU9587|RL9587|
|Warranty||5 Years (Replacement Product Only)|
|Suitable for Gravity Feed||Yes|
|WELs Rating||3 Star|
|Litres Per Minute||9L/min|
|WELs Registration Number||S03627 (V)|
|Shower Rose Diameter||140mm|
Inform your plumber that this installation of a standard unit through floor requires 2 x 15 MI threads (1 for hot, 1 for cold) and they must be 150mm apart and 50mm from the wall or other support.
If the floor connections are more than 150mm apart the shower breech (U shaped part between shower taps) will need to be made to suit. The length of the legs can be varied. Please contact us for a quote
If possible before ordering measure the distance between the intended pipework and the spot over the bath where the water should fall - if this is more than 140mm an extended set should be purchased. This is because the bath taps and the tee-piece at the bottom of the taps are welded in one piece, and the return and reorder process (if the taps are too short) would cause inconvenience.
This unit is designed to go at the end of the bath - if it is to go at the side of the bath you may need a shorter shower arm.